Recent Why SERVPRO Posts

How To Differentiate Mold from Mildew

8/10/2022 (Permalink)

mold growth on wall, measuring mold with tape measure Mold growth in Glendale, CO

Do I Have Mold or Mildew In My Home?

When you come across possible mildew or mold damage in your Glendale, CO, home, you may be wondering which of the two problems you face. There are a few ways to tell the difference between these two forms of fungi. Here are three things you may want to know.

1. Depth of the Growth

One of the main ways to tell the difference between mildew growth and mold growth is how deep it goes. Mildew tends to grow on the surface, while mold tends to root into the substance it's feeding on. Because of this mold can cause actual damage if it’s allowed to remain.

2. Coloration

Another way to tell the difference between mildew and mold damage is the appearance of the fungi you are looking at. Mildew tends to be thinner in appearance and may range in color from gray to white with occasional yellow tones. Mold on the other hand may look slimy or fuzzy, and it has a full range of colors with gray, white, green, brown, orange, and even black tones.

3. Ease of Removal

As mentioned earlier mildew growth on the surface while mold roots beneath. This can affect the ease of removal. Many cleaners are designed to remove mildew with a spray-on wipe off formula. If you try this method and it fails, odds are you may be facing a mold problem instead. When this is the case it's highly recommended that you contact a local mold remediation service. These professionals will have the ability to remove the mold, clean the area, and then make repairs to any damages that may have been caused.

When determining if you have mildew or mold damage in your home, there are few ways you can check. One of the biggest differences is the depth of growth. You can also look at the coloration of the spores to determine which it may be. Finally, how easy it is to remove may be an indication of which species it is. If you do have mold it's highly recommended to contact a remediation service.

A Homeowner Briefing: Broken Pipes and Insurance

7/11/2022 (Permalink)

Leaking pipe Water damage from a pipe break?

Broken Pipes and Insurance

Having a homeowner's insurance policy is necessary to protect your investment, but it takes some work on your side to know what is included or not. Most people know that rising water types of floods are not covered by traditional policies, but what about water damage from a broken pipe? Would that be covered by your plan?

Insurance Coverage for Unexpected Breaks

Each policy should be read carefully for details, but water damage from a pipe that breaks suddenly and without neglect should be covered by most insurance policies. Damage can be mitigated by immediately responding to the flood with the use of a professional restoration company. Services such as water removal, drying, and restoration may also be included in your insurance coverage.

Denied for Negligence

Homeowners have a lot of responsibility for routine maintenance around the home, including maintenance for plumbing. Make sure you keep up with the maintenance of your pipes so that you don't end up with damage from negligence, which may be denied by your insurer. Here are common examples of denials:

• A homeowner ignored a chronic leak and failed to fix a broken pipe, which resulted in a full break and damage to a home.
• Homeowners were not maintaining a warm enough temperature in the home to keep the pipes from freezing during the winter.

Be Your Own Maintenance Manager

A flood is the last thing you want in your home in University Hills, CO. You don't have to be a plumber in order to take care of your plumbing system. You can keep your home reliable and safe by educating yourself about care and routine maintenance for your pipes. Most importantly, never shut off your heat during the winter months, even if you go on vacation, and inspect your system of pipes regularly. These actions will help prevent breaks and all complications of water damage in your home.

3 Ways To Treat Burns in the Workplace

5/21/2022 (Permalink)

Healing a burn No matter the type of burn, use cool, wet cloths to ease the pain and prevent swelling.

Workplace Burns: Three Treatment Options

When a fire occurs at your University Hills, CO, business, and an employee suffers burns, it can cause you as much worry and anxiety as the fire damage you discover in the aftermath. Any kind of burn, no matter its seriousness, is likely to cause pain, and there are a few steps you can take to treat and protect the burn until medical help arrives.

1. Keep the Employee Calm
Your injured employee is likely to feel fear and pain as the result of a burn, so before you render first aid, take him or her to a quiet area and seat them. Check for signs of shock, which may include changes in breathing and cold, clammy skin. Offer water and encourage the employee to rest and stay still while you continue to treat the burn.

2. Use a Burn First Aid Kit
Keeping a first aid kit specifically to treat burns can help you react faster when an employee gets burned trying to fight a blaze and reduce the risk of fire damage. Fresh gauze, cotton or moleskin pads, bandages, burn cooling ointment and topical painkillers are all useful items for your burn kit. Use gauze or the pads to cover the burn, taking care to avoid breaking any blisters that formed after the burn occurred.

3. Use Cool Cloths
No matter the type of burn, using cool, wet cloths to ease the pain and prevent swelling can help keep the employee calm. Have a few employees hold a damp, cold cloth to the burn and stay with the injured person if you must oversee the initial repairs, fire damage reports and the assessment performed by your fire mitigation and restoration company.
Fire injuries at your University Hills, CO, business can be frightening, but you can prepare for an emergency by keeping a burn kit on hand and staying calm to assist an injured employee until medical help arrives.

4 Steps To Stop Mold Growth

1/28/2022 (Permalink)

walls of a bedroom covered with mold growth Mold can grow anywhere if moisture and organic material are present.

Stop Mold Growth At a Residence 

Mold can grow anywhere if moisture and organic material are present. Mold spores are everywhere, and an environment that has everything necessary for fungi to thrive runs a high risk of developing a mold problem. Mold can start growing in as little as 24 to 48 hours after water damage. Take these four steps to stop mold growth at a residence in Cheesman Park, CO.

1. Reduce Moisture

Lowering moisture levels is the single most important mold prevention method. Mold requires moisture and a source of food in order to grow. Extract excess water introduced to a residence from any source and run a dehumidifier to draw out residual moisture.

2. Schedule a Mold Test

If your home has recently experienced water damage, it may be advisable to schedule a mold test. An environmental hygienist or mold specialist can take air or spore samples to determine which species of mold are present and determine the extent of an infestation.

3. Make a Remediation Plan

If less than 10 square feet of visible, non-toxigenic mold is present, a homeowner can take steps to clean up and prevent the damage. It is advisable to seek assistance from a mold damage remediation service for a widespread infestation or one involving hidden mold or toxigenic species.

4. Clean or Tear Out Moldy Materials

Mold prevention and remediation experts can recommend which materials can be cleaned and which should be torn out or disposed of and replaced. In general, hard surfaces with superficial mold are better candidates for cleaning than porous materials such as carpet or drywall.

These steps can be useful for stopping mold growth at a residence in Cheesman Park, CO. While mitigating water damage and reducing moisture may be enough to slow or stop active growth, mold spores may continue to spread to more advantageous areas until existing colonies are eliminated.

A Helpful Guide to Handling Category 3 Water Damage

12/28/2021 (Permalink)

Overflowing broken toilet An overflowing toilet can cause water damage category 3.

Ways To Handle Water Damage In Your Business

Water damage in Hampden, CO, can be an upsetting and time-consuming problem to deal with, especially if it involves contaminated flood water or sewage. Thankfully, there are ways to handle the situation and restore your business to its original condition.

An Overview of Damage Categories

Although a professional repair team is capable of assessing your business, it may be helpful to know about the different types of water damage. There are three categories:

? Category 1: This kind usually occurs through clean water sources, such as a broken plumbing line or a malfunctioning water heater.
? Category 2: With this type, the water is no longer clean but won’t cause any illnesses unless consumed in large amounts.
? Category 3: Often referred to as “black water,” this category involves unsafe contamination from flood water, sewage or a toilet overflow.

Each of these categories requires thorough cleaning procedures. When dealing with categories 1 and 2, professionals will need to extract standing water and dry your business. Cleaning and sanitizing is also important to remove odors and disinfect any furnishings. However, resolving category 3 water damage involves these steps and more.

Cleaning Up Category 3 Water Damage

After you contact water damage restoration experts, the professionals should put a strategy into place to clean and restore your business. The process generally includes removing porous materials that cannot be disinfected, extracting moisture with pumps and vacuums and drying the building with dehumidification equipment and air movers. An air filter will help clean the air, and disinfectant will remove bacteria and mold.

After performing these steps, the last and most time-consuming stage is restoration. In many cases, you will need to repaint walls, lay new flooring and replace drywall that was removed.

Although it may seem like there’s no solution when flood water or sewage enters your business, it’s still possible to solve these issues. With a professional team and some extra time, you can be sure that your building will be as good as new.

What to Expect With Fire Cleanup

11/19/2021 (Permalink)

Sofa, plastic debris from fire damage. Walls covered with smoke due to fire damage Smoke damage in a Congress Park, CO home

If you’ve experienced fire or smoke damage in Congress Park, CO, then you may be wondering where to start with the cleanup process. Here are a few things you can expect to see in your home after a fire and during restoration.

What Steps Cleanup Can Include

Calling your local fire damage professional can be a great first step in the cleanup process. Some things they can take care of include:

  • Boarding and tarping the home against further damage
  • An inspection and assessment of damage type and necessary repairs
  • The removal of flood water and drying if necessary
  • Any necessary smoke cleaning and removal of soot damage
  • The cleaning of salvageable materials
  • The replacement and restoration of unsalvageable materials
  • Any necessary sanitation

What Types of Damage Fire Can Cause

Aside from obviously burned materials, a fire can leave unpleasant smoke damage which can be difficult to deal with. Fires may also weaken structural integrity, or cause pipes to burst which cause flooding. With flooding comes additional concerns such as mold, or the sanitation issues that can arise with a broken sewer pipe.

How Your Home May Look Afterward

Your home may have experienced a lot of soot damage and required extensive smoke cleaning, but at the end of the process everything should be repaired to pre-fire conditions. This means you can safely live there again without constantly being reminded there was a fire. In fact, you shouldn’t even be able to tell repairs were necessary at all. Knowing their home can be fully restored can be comforting to homeowners, and may be one of the reasons many choose to contact a professional to make any repairs.

A professional team can clean your home of smoke damage and help restore it back to pre-fire conditions. It may take a little time depending on the damage type, but afterwards your home should be clean, sanitized, and ready for you to live in.

Why Does Bread Always Get Moldy?

10/4/2021 (Permalink)

Mold growth on bread Mold is everywhere.

Mold Growth on Bread

Everyone knows the feeling of opening the fridge to make a sandwich, reaching into the bag of bread, and coming into contact with disgusting, fuzzy mold growths presaged by that smell that always seems to accompany moldy bread. Why does food mold, anyway, and why is bread more likely to mold more quickly than anything else? Read on for answers to your Hampden, CO mold problems and culinary woes.

You Can’t Escape Mold

Believe it or not, mold is everywhere. In the air, on your skin, in your food. It’s just a matter of the conditions necessary for it to grow. Bread in particular is appetizing to the mold because of the yeast in it. You can prevent mold on bread by:

  • Storing it in a cool, dry place
  • Wrapping it properly
  • Always checking it for freshness on purchase
  • Only keep small amounts of bread rather than storing it in the long term

Remember that if you find mold on one or two slices of bread, the entire loaf is probably infested with bread mold and just hasn’t begun to sprout.

Refrigerating Bread Actually Makes Mold Grow Faster

Mold is more likely to grow in wet places than in dry ones. When you refrigerate your bread, especially in the plastic bag it usually comes from, the bread “sweats” the moisture inside it only for that moisture to condense against the walls of the bag. That trapped, wet environment is the perfect situation for bread mold to take place and grow.

It’s Not Just Bread

Fridge mold can happen to anyone, but it’s also a sign something may be wrong with your refrigerator. If your fridge isn’t cooling properly, it may go through cycles of hot and cold that lead to condensation on the inner walls. That condensation results in a moist environment that mold loves – with plenty of food to grow on with your fresh groceries ripe and waiting. If you’re having frequent bread mold problems, it’s a definite sign you need to get your fridge checked out.

Understanding Insurance and Mold Coverage

9/19/2021 (Permalink)

Mold growth on ceiling. Unsightly fungus growth can be devastating to your home in Denver, CO.

One of the scariest discoveries you can make as a homeowner in Denver, CO, is fungus growth in your home. It may be black, orange, green, or gray and sprout up in any room. Regardless of the color or space it inhabits, mold is not a welcome part of the decor. What are the next steps? Is mold coverage included in homeowners insurance?

First Fungus Growth, Now What?

Forty-eight hours is all it takes for mold to grow and spread. Once you notice a problem, act fast:

• Do not attempt to touch or remove the impacted areas yourself. If handled improperly the particles may be released into the air and spread further.
• Call a mold remediation specialist to remediate the problem. Typically, this involves assessing the severity of the mold contamination, containing the mold, and filtering the air. Contents are discarded, cleaned, and/or restored as appropriate.

Who Pays for Remediation, Homeowner or Insurance?

Mold insurance coverage is not usually part of a standard insurance policy, but there are instances when it may be covered:

• Insurance considers mold within coverage when it is caused by another insured event, such as water damage from a fire or storm. If a flood causes water damage you must have flood insurance for the resulting mold to be covered.
• The incident that initiates the mold must not be preventable. If failing to maintain your old pipes causes water damage, any mold resulting from that occurrence is not covered.
• Some insurance companies offer partial mold remediation reimbursement. It also may be possible to purchase separate mold coverage as an add-on to the policy before a mold-related instance occurs. Talk to your agent to understand your specific coverage.

Unsightly fungus growth can be devastating to your home in Denver, CO. Once your senses alert you to a mold problem, immediately contact a mold specialist and your insurance agent.

3 Tools That Will Help With Mold Prevention In Your Home

6/15/2021 (Permalink)

Bedroom with mold damage Residential mold damage in Capitol Hill, CO.

Mold Prevention

Mold growth in your Capitol Hill, CO, home could lead you to overspend on costly repairs, especially if you do not treat it. Mold prevention is possible with frequent cleaning and maintenance of your home. Microscopic mold spores are attracted to:

  • Wood
  • Insulation
  • Drywall

They will feed on these materials and, given humid and dark conditions, will develop into mold colonies. You can prevent mold growth by using these three helpful tools.

1. A Dehumidifier
Mold is attracted to humid conditions. In the wild, it is a natural decomposition agent that consumes fallen leaves and dead animals. It can be found virtually anywhere with oxygen and moisture. A dehumidifier will help lower humidity levels in your home, keeping it from encountering optimal levels for growth. Place dehumidifiers in areas with lots of moisture to decrease the chances of microbial growth.

2. An Air Purifier
The air quality of a home measures how many particles are in the air. The more particles there are, the worse the air quality is. An air purifier will improve air quality by filtering out microorganisms from the air. This can help with mold prevention. HEPA air purifiers are considered the best for their capacity to filter out microorganisms as small as .03 microns. Mold spores range from .02 to .10 microns, making a HEPA air purifier ideal for preventing mold growth.

3. Ventilation Systems
A ventilation system will help to reduce moisture in areas with frequent water use, such as bathrooms and kitchens. The moisture and darkness provided by these areas give mold optimal conditions to thrive. Installing ventilation systems will lower moisture levels, prevent water damage from standing water and keep mold colonies from developing on the construction materials of your home.
Year-round mold prevention with cleaning and maintaining your home is the best way to keep your home mold-free. If you have found mold damage from untreated mold, contact a mold remediation service to aid in cleaning and restoring your property.

SERVPRO's 7 Steps for Fire Restoration

2/23/2021 (Permalink)

workers using electrical scaffolding for smoke removal on building Fire restoration services in Denver, CO.

Fire Restoration Process

When a blaze negatively impacts any office, it takes a team of fire restoration experts to get everything back to normal. SERVPRO’s employees have the know-how to make the journey as painless as possible. Here are the seven stages that are followed every time a business fire rebuild is initiated.

1. Service Initiation
Assistance begins by getting in touch with SERVPRO’s friendly and experienced representatives. These skilled information gatherers are always available, so work can get started at any moment.

2. Damage Inspection
SERVPRO’s disaster assessment authorities arrive in Denver, CO, and determine what actions are necessary. This step is essential for crafting an effective recovery plan.

3. Protection Application
After a fire, bad weather and intruders have the potential to cause additional havoc. Prevention of damage from outside elements is an often neglected aspect of fire restoration. Use SERVPRO’s skilled helpers to apply boards and tarps wherever necessary.

4. Water Removal
When buildings get damaged in fires, rainwater can seep inside. Indoor flooding caused by pipe breaks is another possibility. Whatever the scenario, dampness must be handled with urgency. Damage increases with every minute it takes to dry out. SERVPRO’s water elimination gurus know exactly how to make this stage extra speedy.

5. Soot Removal
SERVPRO’s rebuilding services include the elimination of soot from walls and ceilings. The specialized equipment they possess is necessary for the execution of this critical phase.

6. Cleaning of Office Essentials
Sanitizing computers, chairs and filing cabinets damaged by fires can be a complicated matter necessitating multiple washing techniques. Let SERVPRO get rid of burnt odors and recover salvageable items.

7. Infrastructure Restoration
Severely burned offices need major repairs, everything from replacing drywall to installing fresh carpet. SERVPRO’s rebuilding masters have the ability to do it all
Fire restoration is a complex process involving special skills. Always hire SERVPRO’s disaster recovery wizards to manage the aftermath of a fire.

How Long Does Commercial Mold Cleanup Usually Take?

12/28/2020 (Permalink)

Worker using protective gear while doing mold removal Mold cleanup services in Denver, CO

Cleaning up mold in a commercial building may take three to seven days or longer. The duration of cleanup depends on the square footage in which mold removal is required and other factors that are unique to an infestation. If you know or suspect that mold is growing inside of a building in Denver, CO, the following pointers are helpful for coming up with a general estimate for the length of cleanup.

Removal and Cleanup Takes Up To a Week

When commercial mold cleanup professionals arrive on-site, preparation is necessary before mold can be removed or cleaned. Several measures must be taken to resolve any mold problem:

  • Contain an infestation
  • Remove all mold
  • Clean up contamination
  • Apply antifungal and disinfecting solutions

Each of these measures may take hours or days. Mold growth may also contaminate porous building materials and contents that should be disposed of and replaced.

Remediation May Also Require Restoration
Absorbent building materials such as drywall and insulation may need to be torn out during mold cleanup. Remediation includes mold removal and the disposal of materials ruined by fungus exposure.
A Business Should Suspend or Relocate Operations
It may be necessary for a business to cease operating during mold remediation or relocate to a different part of a structure or complex. Depending on how many square feet of a commercial structure will require remediation and the accessibility of entrances, exits, and work areas, routing foot traffic around contaminated areas may be a workable plan.
A business or building owner should expect mold remediation to continue for at least three days at a commercial property in Denver, CO. Most infestations can be removed, cleaned, and restored in a week. Large-scale or toxigenic mold removal may take longer, particularly if full containment must be set up before cleanup or many contaminated building materials must be torn out and replaced.

Understanding How Renter’s Insurance Does and Doesn’t Cover Mold

11/24/2020 (Permalink)

Renters insurance form and dollars on the table. It's important to have renter's insurance

What Does A Rental Policy Cover?

When you’re renting an apartment or residence, it’s important to have renter’s insurance. The owner of your property or landlord should have a property insurance policy in place to cover damages to the physical structure. This coverage doesn’t extend to your belongings, so you need a renter’s insurance policy to cover your losses in Glendale, CO. Rental insurance protects you in the event that your possessions are stolen or damaged due to events such as a fire. Mold damage can also ruin your things, so it’s important to understand what a rental policy actually covers.

Covering Damage Due to Mold
As with any insurance policy, you should be knowledgeable about what your rental insurance coverage includes. Typically, renter’s policies cover mold damage resulting from a covered peril:

  • Internal water damage that leads to flooding, such as burst pipes or leaky cooling system
  • Fire or lightning
  • Theft or vandalism
  • Effects of certain weather events such as hail, wind, ice and snow

Take a look at your existing policy and contact an agent if you have questions about inclusions and exclusions. When you experience a situation that can lead to mold damage, you should act quickly to lessen the impact of destruction on your items. You may live in an area that requires flood insurance to cover water damage associated with external flooding. You should also inquire about the coverage that your landlord has for the physical property.

Handling Mold Cleanup
Mold removal should be left to a professional company that specializes in mold remediation and restoration. Such a company has the equipment and the knowledge to properly clean items that have been affected. Not only will that business prioritize repairing over replacement which lowers the costs, but it will also restore your things to pre-damage conditions as quickly as possible. While most rental insurance policies place limits on coverage, your policy may pay for some or all of the cleanup.

Top 5 FAQs About Mold

10/9/2020 (Permalink)

Mold growth on floor after pipe leak Black mold damage in Denver, CO

Questions About Mold Growth

Mold growth is an extremely common issue that the majority of homeowners do have to handle at some point. Spreading mold can quickly create larger problems for your property in Denver, CO, so acting swiftly is incredibly important. Read on to have your frequently asked questions regarding mold growth answered.

1. How Can You Tell Whether You Have Mold?
In most cases, you will be able to see mold growth. Black mold, one of the most common household varieties, is black or dark green in color and might look like a stain on the surface of an object. In some cases, a musty smell can also indicate mold growth.

2. Where Does Mold Grow?
Mold thrives in dark, moist environments. This means that any area of your house that comes into frequent contact with water could experience mold growth. Common places to find mold include your bathroom, kitchen, laundry room, basement and garage.

3. How Can You Stop Mold from Spreading?
The best way to prevent spreading mold is to eliminate it at the source. In most cases, a moisture issue will be the source of the mold. Check for any leaks, pipe bursts, basement floods, damp showers or other water related issues.

4. Does Mold Go Away By Itself?
Mold is a living organism, so it's natural to assume that you could kill it by depriving it of its vital nutrients. Unfortunately, this is not the case. Cutting off the mold's access to water and nutrients may temporarily prevent it from spreading, but it won't solve the mold problem.

5. How Can You Fix a Mold Issue?
Your mold removal tactics largely depend on the scale of the problem. Larger issues do require assistance from mold remediation experts. You can address smaller problems using a kitchen scrub brush and a non-toxic cleaning solution comprised of equal parts water and white vinegar.
Preventing spreading mold is key when it comes to protecting your residential property. Make sure to contact mold remediation experts for more information and assistance resolving any mold issues you might have.

Do You Need Coverage for Mold Exposure Claims?

9/14/2020 (Permalink)

worker with protective gear while removing mold from building Mold clean up services in Cheesman Park, CO

Most insurers have cut coverage for mold claims out of commercial liability policies. Property owners may need to buy back coverage of this hazard for a building in Cheesman Park, CO. The ability to file mold insurance claims can save tens of thousands of dollars in a structure with a history of mold or water damage.

The Effect of Mold Endorsements

Endorsements affect an insurance policy by taking away or restoring coverage for stated perils. Check for any of the following factors:

  • Mold endorsements
  • Mold exclusions
  • Limited fungus coverage

If you are not sure how much coverage is available for mold claims, consult with an insurance agent. It may be possible to restore coverage that has been excluded from a property or liability policy.

Regaining Mold Coverage
Commercial policyholders and insurers may be able to use endorsements and riders to restore coverage for perils cut out of a policy. This can be the best way to regain lost coverage for mold insurance claims. Make sure policy limits are sufficient to offset mold cleanup and remediation costs.

Major Mold Remediation Expenses
If you do not have coverage for mold when an infestation becomes apparent, you will not be able to file a mold claim. The best way to limit expenditures on cleaning up mold is to ensure that water damage is mitigated and extracted within 48 hours and that the affected area is completely dried and restored. Most water damage is covered under general commercial property policies.
You may want to look into buying back coverage if your commercial property and liability policies exclude mold. Consider adding an endorsement or rider to a current policy or seek an additional policy for making mold insurance claims. Make sure that premiums are not unnecessarily high and that limits are sensible based on the likelihood of a mold problem at a building in Cheesman Park, CO.

SERVPRO’s Mold Remediation Process for Commercial Buildings

6/20/2020 (Permalink)

SERVPRO’s Mold Remediation Process for Commercial Buildings

If your commercial building sustains mold growth, whether severe or moderate, it’s important to remedy the situation as quickly and safely as possible. Hiring SERVPRO for your commercial mold remediation needs means the job will be done thoroughly, leaving you time to manage your business. Here’s what you can expect the process to look like:

1. Initial Contact
As soon as you notice a mold problem call 1-800-SERVPRO. A customer care center specialist will speak with you about the mold issue. They’ll use this information to prepare their professional remediation experts and specialized equipment to tackle the job.

2. Inspection
Next, these professionals will inspect your building for all signs of mold. A thorough inspection will be done of all areas in which it could be hidden (e.g., behind drywall or in flooring).

3. Containment
One of the most important components of commercial mold remediation is preventing cross-contamination. Physical barriers and negative air chambers are just a couple of containment measures used during the remediation process. Mold spores can easily travel to other parts of the building, so HVAC systems and fans must be turned off.

4. Air Filtration
Microscopic mold spores are always floating through the air, but when there are visible signs of mold it’s excessive. Professional equipment (e.g., HEPA vacuum) is used to eliminate the spores to prevent the spread.

5. Mold Removal
Next, it must be determined what’s salvageable. Then, the professionals will safely remove and dispose of anything that’s too damaged to be cleaned. Badly-infested furniture or even carpet or drywall may have to be discarded.

6. Cleaning
All restorable items will be thoroughly cleaned and sanitized. A variety of professional equipment and techniques will be used, including deodorization.

7. Building Restoration
Finally, the restoration of the building itself will begin. This may include replacing drywall, installing new flooring and subfloors, and possibly some reconstruction of badly damaged areas.
The first key to commercial mold remediation is knowing who to contact. If you find mold growth in your Denver, CO, building, SERVPRO's mold restoration experts are Here to Help.

What Can You Learn From a Mold Inspection?

5/11/2020 (Permalink)

Background of mold, sign that says ANYWHERE Mold spores are everywhere

Mold spores are everywhere, but sufficient moisture and food are necessary for colonies to form. A mold inspection can identify whether significant amounts of fungi are present in a building in Glendale, CO. Here are several important insights this inspection can provide to a prospective buyer of commercial property.

The Condition of a Building

A general building inspection should identify the presence of visible mold. Mold can also be hidden in a variety of locations:

  • Around pipes
  • Behind walls
  • Beneath paneling
  • Inside air ducts
  • On top of ceiling tiles
  • Under flooring
  • Under wallpaper

A musty odor often indicates the presence of hidden mold. General inspectors may recommend a mold inspection, or prospective buyers can seek out this additional measure. Air or surface testing for the presence of spores or microbial volatile organic compounds released during the growth cycle of fungus will improve the accuracy of an inspection.

Whether Mold Is Active or Inactive
Once mold starts to grow in a building, the infestation will not go away without cleaning and remediation. Controlling indoor humidity can render mold inactive, but a major mold problem may be more likely if moisture levels rise again. An inspection should locate and identify fungi at any point of the growth cycle.

Potential Water Damage Problems
Timely and thorough restoration work should eliminate most of the visible signs of past water damage in a commercial building. Mold growth might still persist in areas prone to developing leaks. While inspecting a structure for mold is costly, the results may be worthwhile for determining whether a property is a sound investment.
A mold inspection is helpful for determining the condition of a commercial property in Glendale, CO, particularly if the structure has suffered water damage in the past. Mold infestations may be more likely in the future if damage has not been properly restored and underlying issues addressed.

Minimize Moisture To Inhibit Mold Growth

3/26/2020 (Permalink)

Close-up Photo Of Flooded Floor In Kitchen From Water Leak Part of mold prevention includes eliminating cracks and crevices that allow for drips and leaks

Three Rules To Minimize Moisture Levels

Is mold prevention possible? Yes, it is. Homeowners in Congress Park, CO, can play a leading role in fighting off fungal growth; they just need to be proactive and aware, putting in place the appropriate measures to fight off those nasty microbes. To avoid have contamination, keep in mind one simple rule: limit excess moisture. Spores feed on organic material and water; therefore, if your home remains dry, they don't have the catalyst to spread. Follow these three rules to minimizing moisture levels.

1. Reduce Humidity

Mold growth is limited when humidity remains low, so maintain a 30 to 50% status at all times. For many residents, that is as simple as running the air unit throughout the day. It picks up the excess fluid for you, leaving your place cool. If that isn't enough, purchase moisture absorbent products for bathrooms and closets and run exhaust fans in the kitchen and showers.

2. Seal Openings

Part of mold prevention includes eliminating cracks and crevices that allow for drips and leaks. Regularly inspect your windows, roof, and plumbing, looking for any issues. Seal up any concerns, locking out the rain and dew. Every month or so, check on your shower stalls. Don't allow for caulking to disappear. Reapply as needed to avoid it slipping in the walls.

3. Cleanup Flooding

An unexpected flood from outdoors or pipe breaks leads to massive water damage. Too much fluid simply fosters microbial development. Don't allow it to linger. Contact a water and mold remediation company to inspect the premises promptly. Not only does the room need immediate drying, but also should have much of it torn out, eliminating the ability for spores to feed and spread throughout the home. Teams can use high-tech equipment to clean up the premises and avoid further issues.
Yes, mold prevention is possible. People simply need to be conscious of the dangers water can pose. Remember that wet is trouble and dry is better.

We are Cleaning Experts

3/23/2020 (Permalink)

organisms floating with the words Here to Help over them We are here to help you in this time of need!

SERVPRO is Here to Help during this time of need

During this unprecedented time caused by the global pandemic of coronavirus, this is a reminder to our customers that we are specialists in cleaning services, and we adhere to the highest cleaning and sanitation standards.

Specialized Training

We are prepared to clean and disinfect your home or business, according to protocols set forth by the Centers for Disease Control and Prevention. We have years of experience in dealing with biological contaminants, and we will go beyond the scope of work that regular janitorial staff perform on a daily basis.

The CDC encourages cleaning of high-touch surfaces such as counters, tabletops, doorknobs, light switches, bathroom fixtures, toilets, phones, keyboards, tablets and tables. Other spaces mentioned in the CDC’s guidance for commercial spaces include:

  • Kitchen/Food Areas
  • Bathrooms
  • Schools/Classrooms
  • Offices
  • Retail Spaces
  • Water Fountains
  • Shelving/Racks
  • Sales Counters
  • Carpets and Rugs
  • Stair Handrails
  • Elevator Cars
  • Playground Equipment
  • Fitness Equipment

Specialized Products

The CDC recommends usage of a labeled hospital-grade disinfectant with claims against similar pathogens to the coronavirus. Multiple products in the SERVPRO product line carry the EPA-approved emerging pathogens claims. While there is currently no product tested against this particular strain of the coronavirus, we are following all guidelines as provided by the CDC and local authorities.

Call Today for a Proactive Cleaning

If your home or business needs deep cleaning services, call the experts today – SERVPRO of Denver East & Southwest, (303) 733-9076

How SERVPRO Can Help Your Insurance Adjuster

1/23/2020 (Permalink)

Business Communication Connection People Concept Did you know that we are a Preferred Vendor for many insurance companies

Reasons Your Insurance Adjuster May Recommend SERVPRO for Restoration Needs

After a disaster at your Congress Park, CO, company, your insurance adjuster may recommend a local damage restoration service such as SERVPRO. Your insurance may have several reasons for listing these professionals as a preferred vendor. Here are the top three.

1. Vendor Qualifications

One of the main reasons your insurance company may request you work with a preferred vendor is that they have to meet 21 different qualifications. This allows your insurance to know that not only with the job be done, but it will be done well with all the safety and sanitation guidelines met. Preferred vendor status means that your agent trusts this company to restore your property to look “Like it never even happened.”

2. Electronics Claims Service

One advantage your insurance adjuster may appreciate while working with SERVPRO is their electronic claims inventory service. This service includes a remote accessible electronic database where the restoration team can upload data relevant to the restoration job. This often includes itemized lists of damaged items, photographs of the damage, and a restoration progress report.

3. Training for Various Disasters

One helpful feature of a preferred vendor for your insurance claim is that often they can help with various types of damage. Fire damage can result in flooding after fire suppression efforts leave pools of water. Similarly, if not quickly removed this water can lead to potential mold. A professional service already knows what to look for, and has the tools and experience necessary for preventing further damage.
There are a number of reasons your insurance adjuster may recommend SERVPRO for your restoration needs. Not only do these professionals have the industry qualifications, but their inventory claims service may help your insurance agent look through the documentation for the damage your company property has incurred. This restoration service also has the ability to deal with a number of damage types including fire, flooding, and mold.

How To Prepare Your Business For a Fire

12/31/2019 (Permalink)

Testing a smoke alarm Test the smoke detectors once a month

Preparing Your Business for a Fire

A fire at your Hampden, CO, business is a worrisome thought. However, there are some precautions, such as installing a fire sprinkler system, that you can take to help prepare your business for a fire.

Fire-Suppression Equipment

Fire suppression can be difficult and dangerous, especially if the fire has grown large. It is important to have supplies on hand so that your business is always prepared. The following items are very useful and may be required depending on the building codes in your location:

  • Smoke detector
  • Fire extinguisher
  • Sprinkler system
  • Fire blanket

Be sure to test the smoke detectors once a month and replace the batteries every six months. Also, make sure you and your employees know where fire extinguishers and blankets are located. Unfortunately, many people do not install a fire sprinkler because they worry about water damage. It is important to understand that properly-installed sprinkler systems are very reliable and rarely discharge without an actual fire. Fire sprinkler cleanup is nearly always simpler than restoration following a fire that was allowed to grow large. It is much easier to deal with water damage from a sprinkler than a severely fire-damaged building.

Storage Solutions

There are some documents, such as business licenses, contracts and insurance policies, that are a major hassle to replace. It is important to keep such items in a fire-proof safe. Additionally, you may want to store copies in an off-site location or upload digital versions to cloud storage. Having important documents safe and ready to go when you need them after a fire can reduce stress and help keep your business running smoothly.
Even the most well-prepared buildings can experience a fire. A fire sprinkler system and other precautionary measures can help minimize damage, but you may still feel overwhelmed at the prospect of cleaning up and making repairs. Fortunately, you can hire a certified restoration company to help get your commercial building back to preloss condition after a fire.

3 Ways To Keep Your Washing Machine Mold-Free

11/27/2019 (Permalink)

The hand of someone setting a washing machine If you notice a mold smell coming from your washing machine, don’t wait

3 Ways To Keep Your Washing Machine Mold-Free

You rely on the washing machine in your Capital Hill, CO, home to turn your dirty laundry into fresh and clean clothes. However, like all household appliances, your machine needs to be well maintained to prevent problems from occurring. While it may seem unnecessary to clean an appliance that already does the cleaning for you, failing to do so can cause mold to crop up in your unit. Here are some helpful guidelines for taking proper care of your appliance and keeping mold damage at bay.

Leave the Door Open

During a typical wash cycle, your appliance uses multiple gallons of water to thoroughly clean your clothing. This means that there are still traces of moisture left in the machine even after the cycle is over. To prevent this moisture from building up and leading to mold growth, always leave the washing machine door open after you’re done with a full load. This can help the unit dry out faster and more effectively.

Clean the Gasket

The machine’s gasket, which is the circular rubber flap that wraps around the inside of the door, is a major breeding ground for mold. If you ever notice a mold smell coming from your unit, there’s a good chance that it originated from under the gasket. Be sure to clean this part of your machine at least once a month to prevent water buildup that can create mold.

Clean the Detergent Drawer

To keep your detergent drawer free of mold, make sure to do the following:

  • Remove it from the machine
  • Soak it in hot water
  • Thoroughly remove any traces of mold
  • Rinse and let it dry completely

You can use a toothbrush to pry mold out of all the nooks and crannies in the detergent drawer. Make sure the drawer is completely dry and clean before putting it back in place.
If you notice a mold smell coming from your washing machine, don’t wait. Let mold remediation specialists take care of the problem quickly and expertly.

How To Prevent Mildew Growth on Plants

9/27/2019 (Permalink)

Plant with mildew If you notice signs of plant mildew in your Denver, CO, home, it may be a result of humidity

Tips for Stopping Mildew From Growing On Your Houseplants

While mold can affect many different surfaces in your home, mildew is found exclusively on the surfaces of plants. If you notice signs of plant mildew in your Denver, CO, home, it may be a result of humidity, damp conditions or poor air circulation around the plant. You should call a professional immediately if there is any evidence of mildew on your houseplants. However, this is a problem that can be easily prevented. Follow these tips for stopping mildew from growing on your houseplants.

Choose the Right Plants

Some plants are more susceptible to mildew growth than others. Plant varieties that tend to be less vulnerable to mildew include:

  • Adirondack crabapple
  • Aurora dogwood
  • Iceberg rose
  • Cherokee Brave dogwood
  • Olympiad rose

These plants are bred to resist mildew and are therefore less likely to become diseased. By selecting one or more of these varieties, you can keep your space well protected from plant mildew.

Improve Circulation

Increasing the air flow around your plants helps to guard them against mildew. Make sure that your thermostat is set to a cool temperature and the humidity isn’t too high. When you water your houseplants, avoid watering them from overhead, as this can increase the amount of humidity that surrounds the plants.

Use Fungicides

Another effective way to prevent the growth of mildew is to spray your plants with fungicides. Fungicides are pesticides that can either prevent mildew from growing or eliminate existing mildew. To provide your plants with an extra layer of protection against mildew, be sure to spray them with a trusted fungicide product. It’s crucial to be proactive when keeping your houseplants safe from a mildew infestation.
If you notice any signs of plant mildew in your Denver, CO, home, be sure to take immediate action to keep them safe. A mold remediation company can visit your home and ensure that all traces of the substance are completely gone.

Personal Protection Vital for Mold Removal

7/29/2019 (Permalink)

Man wearing white protective jumpsuit, hat, glasses, gloves and breathing mask Personal protective equipment during mold removal

Protect Yourself During Mold Cleanup

Running a business in North Park Hill, CO, comes with many responsibilities, including ensuring that the environment is a healthy one. Regular inspections and maintenance can ensure all systems are operating properly and that a habitat for mold isn’t flourishing. When mold is found, it is important to protect yourself during cleanup.

Since mold spores love to take to the air and find new homes, wearing the proper personal protective equipment is necessary for removal. Below are four essential pieces of equipment to wear:

1. Safety Goggles

Along with airborne spores, dust and debris can get stirred up. If cutting out mold, goggles shield the eyes from drywall particles floating in the air. They also protect the eyes from the fumes of any harsh chemical being used.

2. Face Mask

For optimal protection, not just any mask will do. It’s best to use an air-purifying respirator. It is designed to filter out mold spores and other particles so that they are not inhaled. They are available in a range of filters, as well as disposable or for reuse.

3. Disposable Gloves

To prevent the spread of mold growth, it is recommended to wear disposable gloves. They come in various materials suitable for the task, including latex, vinyl and rubber.

4. Protective Clothing

For small jobs, wearing old clothes is a suitable option. It is important to remove what you are wearing and wash it after the job to ensure you aren’t bringing mold to other areas of the business. People should also consider wearing disposable hair and shoe covers. For bigger jobs, you may want to consider a disposable suit that can be simply thrown away.

While mold may be a worrisome problem, it is one that can be easily resolved. If you are ready to tackle it yourself, be sure to protect yourself from inhaling or spreading the fungus. If the job is too overwhelming, count on a trusted professional to take care of it for you.

3 Shower Mold Tips for Homeowners

5/30/2019 (Permalink)

close up of moldy shower head Shower mold is a common issue

Tips That Can Help Homeowners Manage Shower Mold

Finding mold in your home’s shower can be incredibly frustrating, especially if the mold seems to keep reappearing in the same spot. There are several tips that can help homeowners in Hampden, CO, to manage shower mold.

1. Remove Mold Quickly

Though the task of cleaning a moldy area may seem difficult, it’s often helpful to remove mold as soon as possible to prevent the mold from spreading. There are a variety of cleaners that can help to remove the mold in your bathroom. When using the cleaners, it can also help to scrub the area with a sponge or toothbrush. As you remove the mold, however, it’s often wise to use gloves to protect your hands.

2. Focus on Prevention

Bathrooms are often the perfect environment for mold due to high levels of humidity. In order to prevent shower mold, it’s often useful to decrease the humidity in your bathroom as much as possible. If you enjoy a warm shower or bath, using a dehumidifier in the bathroom can help to reduce the humidity. Increasing the airflow by turning on your air vents can also help to keep your bathroom dry.

3. Consider Professional Assistance for Widespread Growth

It’s often possible to remove mold in your home’s shower by yourself, but there are certain situations that may indicate the problem is widespread. If mold is present in other areas of your home, this may signify that your home has a moisture problem that needs to be fixed. If black mold is in your home, you may want to employ mold remediation specialists who can ensure the mold is safely removed.

Although shower mold is a common issue, there are several ways homeowners can decrease the likelihood of mold growth in this area. It’s often helpful to remove any mold as soon as you notice it, use preventative methods and to consider employing professionals to help if there is widespread growth present.

What to Expect From the Mold Remediation Process

5/24/2019 (Permalink)

Mold Damage in a residential home in Denver, CO.

The discovery of mold growing in your home or business can be devastating in Denver, CO. Homeowners may worry about the impact of mold damage on property values and about the cost of remediation. If you are dealing with commercial mold damage, you may wonder if the mold removal process will impact your business operations.

Regardless of whether you are dealing with fungus and mildew or mold in home or in a commercial space, you may be wondering what to expect from the remediation and mitigation process. The process involves a few important steps, and a closer look at the process can ease your mind about what to expect.

The Mold Remediation Process

The Mold Testing Process

Many people who call a professional for mold mitigation and removal have noticed obvious signs of fungus or mildew in their property. While some may see mold in home or in a commercial space, others may notice the undeniably smelly odor associated with mold growth. The first step in the mold remediation process is to test for the presence of mold. Through testing, all affected areas that have residential or commercial mold damage or growth can be identified, and the type of mold present can also be identified. These steps are necessary for the effective removal of the mold in the next stage.

The Mold Removal Process

After all affected areas of mold in home or in a commercial space have been identified, the mold removal process can begin. Mold damage must be professionally addressed for your safety as well as to prevent new areas of growth from beginning in other areas of the building. Mold spores are easily dislodged and can flow through the air to take up residence in a new area. Professionals use containment techniques to prevent this from happening while also killing and removing the fungus and mildew from the space. Some properties may have high humidity levels, and this may need to be addressed through de-humidification efforts to prevent more mold from growing.

Deodorization to Remove the Smelly Odor

Even after the mold damage has been removed from the building, a smelly odor may remain. Mold has a distinctly musty and unpleasant odor, and professional deodorization must be completed to address this issue properly. When correcting residential or commercial mold damage, the entire area may be treated through an intensive deodorization process to generate great results. Through this stage of the mold mitigation process, all signs of mold damage may be eliminated from the space, and the only step remaining in the remediation process is to address the damage left behind by the mold removal stage.

Restoring the Building

When professionals remove residential or commercial mold damage, including both fungus and mildew, there may be a need to replace some of the materials that have been damaged. For example, the mitigation process may involve cutting out areas of drywall that have growth on them. Mold in home or commercial spaces can grow on many surfaces, and it is generally necessary to restore these surfaces to their previous condition. The right remediation team will handle all aspects of restoring the building for you, but you should ensure that this service is provided by the team before you sign a service contract.

Between deodorization required to remove the smelly odor of mold to removing the contaminated areas and restoring the damaged areas, there are several important steps to the mitigation process that must be carefully completed. The techniques and craftsmanship of the team that you hire can play a major role in how impressive your property looks after the work has been completed. Keep in mind that your goal should be to eliminate all signs of mold growth rather than to have a home that looks like it has been remediated. Ensure that your contractor can meet your needs in this area before you make a final decision about which contractor to hire.

From Disaster to Development: Community Emergency Recovery

3/24/2019 (Permalink)

SERVPRO is ready to roll out to a home that has been damaged by storms

When a community is hit by a disaster, the effects are immediate and long-lasting. The quick response of the media and short-term relief volunteer crews are vital for providing basic needs and first aid. However, many elements of catastrophic loss are long-term problems. Immediate response activities include:

  • Search and rescue
  • Emergency relief
  • Early population recovery

Of the three, early recovery is most likely to require the services of a catastrophic loss and recovery crew with technicians skilled in water damage repair, general reconstruction, fire and smoke restoration, and similar skills.

Establishing Places to Live, Work, and Learn

Transitional shelters provide places for community members to get food and water, as well as protection from the elements. These shelters provide escape from flooding-damaged homes and create temporary homes, so the affected population can return to work and school routines as soon as possible. With these structures in place, recovery construction professionals can turn their attention to medium- and long-term recovery efforts.

Moving From Relief to Development

This is the time for communities to focus their efforts on rebuilding physical structures:

  • Renovating homes to replace tents and trailers
  • Restoring businesses and public facilities
  • Cleaning up outdoor structures
  • Reconstructing and improving existing infrastructure

During the period of long-term recovery, restoration technicians hold multiple roles, working closely with government officials, private citizens, business owners, and insurance companies. In many communities, this is also a time of further development efforts. For example, a park that has been impacted by storm damage may now see increased planting and new play structures. Private home and business owners may take similar actions on their properties.

Looking to the Future

If North Park Hill, CO, were to be affected by catastrophic loss due to storm damage, flooding, and other natural disasters, it's reassuring to know that recovery and reconstruction teams are trained, equipped, and ready to move into the area. The cooperative efforts of these teams can transform disaster-affected areas to stable neighborhoods with renewed interest in community development.

What is Pretesting? 3 Facts for Homeowners Facing Storm Damage Cleanup

2/18/2019 (Permalink)

Storm waters enter home in Denver, CO

What is Pretesting?

The aftermath of a Denver, CO, storm can leave you with severe damage to your home. Flooding is especially troublesome, as it can affect building materials, electrical systems and valuables. Gauging the total cost of repairs can be difficult, especially when it comes to filing a claim with your insurance company. Having a storm damage and restoration service perform pretesting can lower the cost of your claim, and there are a few facts you can keep in mind that may help you better understand the process.

1. A Pretest Can Gauge Water Condition

Not all flooding is the same, and the condition of the water can greatly affect the cost of cleanup and your insurance claim. A pretest allows flood damage technicians to grade the quality of the flood waters and estimate what will be involved in the restoration. For example, if the flood is the result of a burst kitchen pipe, the water comes from a sanitary source and will likely not cause as much damage as water that comes from an overflowing toilet or outdoor flooding.

2. Cost Estimations Can Be Made More Accurately

Pretesting damaged items can lower insurance claim costs by letting restoration technicians know whether clothing, documents and other objects can be repaired or if they must be declared a total loss. Detailed estimations can result in a more efficient filing process, which might help you recover faster.

A pretest of certain items can help you understand which restoration options are available, as well as the cost of each. Technicians from a flood damage and remediation service could also forward this information to your insurance agent so you all remain on the same page as far as being able to lower the total cost of the claim.

When storms and flooding strike Denver, CO, you may be left with damage to your home and belongings. Pretesting can be one of the best options for evaluating affected items and helping you lower the amount on your insurance statement.

Does Mold Grow in Dry Climates?

11/28/2018 (Permalink)

Mold project in a commercial facility in Denver,CO

Black mold is a concern for businesses all over the country, but sometimes property owners in dry climates fall into the trap of thinking that mold isn't a concern for them. The truth is that many buildings in desert conditions become susceptible because building owners don't watch out for leaks and trapped moisture. If you own property or facilities in Denver, CO, you need to know prevention and remediation steps just as much as property managers in humid parts of the country.

Inspect Your Property

There are several factors common to almost any type of building that could create an environment that supports the growth of black mold.

  • Damaged roofing, including cracked or missing shingles
  • Out-of-the-way, flat areas where spills or rainfall may collect and fail to evaporate fully
  • Holes in the side of buildings caused by wear, birds, rodents, and insects
  • Clogged pipes, water lines, and drains
  • Leaking pipes, drains, exhaust, and faucets

Recognize these factors to avoid trouble.

Respond Immediately to Trouble

As soon as you notice the possibility of trouble, complete necessary repairs. If mold has already established, you may need to schedule professional mold cleanup services. These professionals have the necessary equipment and training to isolate problem areas, clean up existing colonies, and put prevention strategies in place. These professionals often have tools such as thermal imaging to investigate the extent of trouble.

Take Preventative Action

If you haven't found any signs of infestation, it's best to quickly resolve situations such as plumbing leaks or clogged drains. Once or twice a year, you should schedule visits from professionals who understand the risk of mold, mildew, or fungi. Any mold remediation or preventative steps you take should be considered investments in property value.

Your awareness that black mold can be a problem in dry climates is a good defense against trouble on your properties. Be on the lookout for and respond quickly when you spot signs of trouble. Take necessary preventative action to keep your Denver, CO, properties in great shape.

How To Clean Up Your Business After a Fire

11/20/2018 (Permalink)

Clean up after smoke damage in Denver,CO

Three Main Tasks

The blazing destruction of fire roaring through your business can be just the tip of the iceberg. When it comes to dealing with the actual cleanup and restoration in Denver, CO, the real nightmare begins. Not only have you suffered from structural and equipment losses, but now a massive salvage and cleanup effort. Everything from disposal to dry-cleaning to replacement of items will need to be decided. This can be broken down into three main tasks.

1. Removal and Disposal of Burned Debris and Content
Remove burned boards, sheet rock, broken window glass, burnt rugs and other unsalvageable items including furnishings, carpets or drapes. Doors and other structural objects that were burned or warped by the heat should also be disposed of.

2. Decide Which Items Can Be Salvaged
Soot and smoke deposits require special handling as soot contains greasy toxins and both contain chemical residue. Electronics may need to be cleaned and tested by professionals to ensure that they are functional and to make any necessary repairs or backups. A content storage facility in Denver, CO, may be the answer for salvageable or undamaged items while restoration is in progress.

3. Everything Must Be Cleaned and Deodorized
All surfaces in your business need to be carefully cleaned to breakdown smoke and soot and their odor. Walls, ceilings and hard floors must be scrubbed; carpets shampooed or replaced and fabric items such as clothing and curtains need dry-cleaning to remove the sickening odor of a fire. Desks, appliances and other non-porous furnishings may also require ultrasonic treatments. Even areas of the office that were seemingly not affected should be cleaned. If air can get in there, so can smoke, so pay special attention to the HVAC system.

Content cleaning can be an overwhelming process and a professional restoration company should be called on to help get you and your business through the process. It may give you peace of mind as they help you decide what to dispose of, which things scrubbing or dry-cleaning can save and what must be replaced.

What You Should Know About Flooding Damage After a Fire

11/15/2018 (Permalink)

Recent storm caused some flash floods in this Hampden,CO home

After a fire damages your home in Hampden,CO, you may be eager to return to your home and start making immediate repairs. However, it’s important to know that flooding can often occur after a fire. FEMA NFIP, or the Federal Emergency Management Agency’s National Flood Insurance Program, can help you to prepare for a flood at any time, even after a fire.

Why Do Floods Occur After Fires and Why Are They Often Severe?

There are several reasons floods can cause catastrophic damage after a fire. A few common causes of floods occurring after fires can include:

  • Fires frequently destroy plant life and excessive water cannot be absorbed by plants
  • Plant life can take months or even years to grow back, making an area that has experienced fire damage at risk for an extended period of time
  • With less vegetation, an average amount of rain can result in a flood
  • Floodwater picks up any debris left behind from a fire, which can add to the damage done by floodwaters

What Can I Do to Prepare?

There are several ways in which you can prepare for a flood after a fire, including:

  • Purchasing flood insurance from FEMA NFIP or other programs before a fire or flood occurs
  • Store valuable documents and other items in water-proof, fire-proof containers or safes
  • Know multiple ways in which you can evacuate if a fire or flood occurs

It’s important to understand the risks of flooding after a fire. With the help of FEMA NFIP, you can insure your home and be prepared for a flood if it occurs. Understanding why a flood could occur after a fire can help you take preventative steps to protect yourself and your home. If your home has experienced flooding damage or wildfire damage, it can help to contact water and fire damage restoration experts who can help restore and repair you your home.